VOCs industryWaste gas treatment equipmentIs the later maintenance troublesome

After the equipment is bought back, the convenience of maintenance directly determines whether the equipment can run stably for a long time. Many companies worry that high-tech equipment will be troublesome to maintain. So the VOCs industrywaste gas treatmentIs the later maintenance of the equipment troublesome or not

It depends on what type of equipment. Different types of equipment maintenance workload and complexity vary greatly.

    activated charcoalThe maintenance of adsorption equipment looks simple, but it is actually very troublesome. Activated carbon needs to be replaced regularly, and the replacement cycle is as short as one month and as long as three months. When changing carbon, it is necessary to stop production or switch spare boxes. The operation process is easy to cause activated carbon powder to fly, which is harmful to the health of operators. The waste activated carbon that is replaced is a hazardous waste and needs to be stored, transferred and disposed of in accordance with the requirements of hazardous waste management. The procedures are cumbersome and the cost is not low.

Combustion equipment suchRTOAnd RCO maintenance is relatively professional. It is necessary to regularly check the burner, clean the heat storage body, repair the switching valve, calibrate the temperature sensor, etc. These jobs require professionals to operate, and it is difficult for electricians and maintenance workers in ordinary factories to be competent. In the event of a failure, the manufacturer often needs to send someone to the site, and the maintenance response time and cost are relatively high.

Condensinggas separation membraneThe maintenance of VOCs industrial waste gas treatment equipment is much simpler. The whole system has no high-temperature parts and no adsorbents that need to be replaced frequently. The core components are refrigeration compressors and membrane modules. Refrigeration compressors are mature industrial products with long maintenance cycles, and usually need to be replaced every 8,000 to 10,000 hours of operation. The membrane module is a static component with a service life of three to five years, during which no maintenance is required, and only the pressure difference between the two sides of the membrane needs to be observed regularly. The daily maintenance work is mainly to clean the dust on the fins of the heat exchanger, check the pressure and oil level of the refrigeration system, and observe whether the operating parameters of the equipment are normal.

LuoyangWohong PetrochemicalWhen delivering VOCs industrial waste gas treatment equipment, Equipment Co., Ltd. will provide detailed operation and maintenance manuals and train plant operators. The equipment control system has an automatic alarm function, and once an abnormality occurs, it will prompt the fault location and possible causes. Compared with other technical routes, condensation plus gas separation membrane is undoubtedly the most worry-free choice.